All-metal prevailing torque type hexagon nuts |
980 |
7042 |
27042 |
|
7042 |
1998-02 |
Prevailing torque type (all-metal hexagon nuts), style 2 - Property classes 5, 8, 10 and 12 |
Height of nut changed; width across flat according to ISO 272 included |
All-metal prevailing torque type hexagon nuts |
980 |
10513 |
30513 |
|
10513 |
1998-02 |
Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread - Property classes 8, 10 and 12 |
Height of nut changed; width across flat according to ISO 272 included |
Clevis pins with head |
1434 |
|
22341 |
|
2341 |
1992-10 |
Clevis pins with head |
Only one head dimension. Some other nominal lengths defined |
Clevis pins with head |
1435 |
|
22341 |
|
2341 |
1992-10 |
Clevis pins with head |
Only one head dimension. Some other nominal lengths defined |
Clevis pins with head |
1436 |
|
22341 |
|
2341 |
1992-10 |
Clevis pins with head |
Only one head dimension. Some other nominal lengths defined |
Clevis pins with head |
1444 |
|
22341 |
|
2341 |
1992-10 |
Clevis pins with head |
Some other nominal lengths defined |
Clevis pins without head |
1433 |
|
22340 |
|
2340 |
1992-10 |
Clevis pins without head |
Some other nominal lengths defined |
Clevis pins without head |
1443 |
|
22340 |
|
2340 |
1992-10 |
Clevis pins without head |
|
Countersunk (flat) head tapping screws with cross recess |
7982 |
|
|
7050 |
7050 |
1990-08 |
Cross recessed countersunk (flat) head tapping screws (common head style) |
Head dimensions and countersunk angles changed |
Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO) |
965 |
7046-1 |
|
7046 |
7046-1 |
1994-10 |
Countersunk flat head screws (common head style) with type H or type Z cross recess - Property class 4.8 |
Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed |
Cross recessed countersunk (oval) head screws (Countersunk heads according to ISO) |
966 |
7047 |
|
7047 |
7047 |
1994-10 |
Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A |
Nominal size changed; head dimension changed; thread length changed; strength 8.8 omitted; penetration depth of cross slots changed |
Cross recessed countersunk head drilling screws with tapping screw thread |
7504 |
15482 |
|
|
15482 |
2000-02 |
Cross recessed countersunk head drilling screws with tapping screw thread |
Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3.9 omitted; hexagon head with collar and slot (Form L) omitted |
Cross recessed pan head drilling screws with tapping screw thread |
7504 |
15481 |
|
|
15481 |
2000-02 |
Cross recessed pan head drilling screws with tapping screw thread |
Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3.9 omitted; hexagon head with collar and slot (Form L) omitted |
Cross recessed pan head tapping screws |
7981 |
|
|
7049 |
7049 |
1990-08 |
Cross recessed pan head tapping screws |
Marginal change of head dimensions. Caution with automatic feed and connection systems |
Cross recessed raised countersunk head drilling screws with tapping screw thread |
7504 |
15483 |
|
|
15483 |
2000-02 |
Cross recessed raised countersunk head drilling screws with tapping screw thread |
Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3.9 omitted; hexagon head with collar and slot (Form L) omitted |
Drilling screws with tapping screw thread - Mechanical and functional properties |
7504 |
10666 |
|
|
10666 |
2000-02 |
Drilling screws with tapping screw thread - Mechanical and functional properties |
Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3.9 omitted; hexagon head with collar and slot (Form L) omitted |
Grooved pins - Full-length parallel grooved, with chamfer |
1473 |
8740 |
28740 |
|
8740 |
1998-03 |
Grooved pins - Full-length parallel grooved, with chamfer |
Nominal lengths redefined. Shear rate increased. |
Grooved pins - Fulllength parallel grooved, with pilot |
1470 |
8739 |
28739 |
|
8739 |
1998-03 |
Grooved pins - Full-length parallel grooved, with pilot |
Nominal lengths redefined. Shear rate increased. |
Grooved pins - Fulllength taper grooved |
1471 |
8744 |
28744 |
|
8744 |
1998-03 |
Grooved pins - Full-length taper grooved |
Nominal lengths redefined. Shear rate increased. |
Grooved pins - Half-length reverse-taper grooved |
1474 |
8741 |
28741 |
|
8741 |
1998-03 |
Grooved pins - Half-length reverse-taper grooved |
Nominal lengths redefined. Shear rate increased. |
Grooved pins - Half-length taper grooved |
1472 |
8745 |
28745 |
|
8745 |
1998-03 |
Grooved pins - Half-length taper grooved |
Nominal lengths redefined. Shear rate increased. |
Grooved pins - One-third-length centre grooved |
1475 |
8742 |
28742 |
|
8742 |
1998-03 |
Grooved pins - One-third-length centre grooved |
Nominal lengths redefined. Shear rate increased. |
Grooved pins with countersunk head |
1477 |
8747 |
28747 |
|
8747 |
1998-03 |
Grooved pins with countersunk head |
Chamfer redefined |
Grooved pins with round head |
1476 |
8746 |
28746 |
|
8746 |
1998-03 |
Grooved pins with round head |
Chamfer redefined |
Hexagon Bolts without Hexagon Nut - with Hexagon Nut, Type g |
601 |
4016 |
24016 |
4016 |
4016 |
2001-03 |
Hexagon head bolts - Product grade C |
Nominal size extended; width across flats according to DIN ISO 272 included |
Hexagon bolts, Metric fine thread, Types m and mg |
960 |
8765 |
28765 |
8765 |
8765 |
2001-03 |
Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B |
Nominal size extended; width across flats according to DIN ISO 272 included |
Hexagon flange bolts |
6921 |
|
1665 |
|
8102 |
1998-11 |
Hexagon bolts with flange, heavy series |
Dimensions partially changed; width across flats according to ISO 272; strength 12.9 omitted |
Hexagon head bolts with shank; M 1,6 to M 39 screw threads, Product grades A and B |
931-1 |
4014 |
24014 |
4014 |
4014 |
2001-03 |
Hexagon head bolts - Product grades A and B |
Nominal size extended; width across flats according to DIN ISO 272 included |
Hexagon head screws - Product grades A and B |
933 |
4017 |
24017 |
4017 |
4017 |
2001-03 |
Hexagon head screws - Product grades A and B |
Nominal size extended; width across flats according to DIN ISO 272 included |
Hexagon nuts with flange |
6923 |
|
1661 |
|
4161 |
1998-02 |
Hexagon nuts with flange |
Fine thread omitted to be included in a separate standard later); width across flat M10 changed |
Hexagon nuts; Metric Thread, Type g |
555 |
4034 |
24034 |
4034 |
4034 |
2001-03 |
Hexagon nuts - Product grade C |
Width across flats according to DIN ISO 272 included; nominal diameter reduced |
Hexagon nuts; Metric screw threads; Product grades A and B |
934 |
4032 |
24032 |
4032 |
4032 |
2001-03 |
Hexagon nuts, style 1 - Product grades A and B |
Nominal diameter changed, height of the nut changed partially; nuts with fine thread specified in DIN EN ISO 8673; width across flats according to DIN ISO 272 included |
Hexagon nuts; Metric screw threads; Product grades A and B |
934 |
8673 |
28673 |
|
8673 |
2001-03 |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B |
Nominal diameter changed, height of the nut changed partially; nuts with regular type screw thread specified in DIN EN ISO 4032; width across flats according to DIN ISO 272 included |
Hexagon screws, Thread Approximately to Head, Metric Thread, Type g |
558 |
4018 |
24018 |
4018 |
4018 |
2001-03 |
Hexagon head screws - Product grade C |
Nominal size extended; width across flats according to DIN ISO 272 included |
Hexagon socket countersunk head screws |
7991 |
10642 |
|
|
10462 |
2004-06 |
Hexagon socket countersunk head screws |
|
Hexagon socket head cap screws |
912 |
4762 |
|
|
4762 |
2004-06 |
Hexagon socket head cap screws |
Nominal size range changed; fine thread deleted (ISO 21269) |
Hexagon socket set screws with cone point |
914 |
4027 |
|
|
4027 |
2004-05 |
Hexagon socket set screws with cone point |
Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted |
Hexagon socket set screws with cup point |
916 |
4029 |
|
|
4029 |
2004-05 |
Hexagon socket set screws with cup point |
|
Hexagon socket set screws with dog point |
915 |
4028 |
|
|
4028 |
2004-05 |
Hexagon socket set screws with dog point |
Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted |
Hexagon socket set screws with flat point |
913 |
4026 |
|
|
4026 |
2004-05 |
Hexagon socket set screws with flat point |
Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted |
Hexagon thin nuts with M 1,6 to M 10 threads |
439-1 |
4036 |
24036 |
4036 |
4036 |
2001-02 |
Hexagon thin nuts (unchamfered) - Product grade B |
Correlation of dimensions with DIN 439-1, except for the width across flat of the nut M10 |
Hexagon thin nuts with M 1,6 to M 52 and M 8x1 to M 52x3 threads |
439-2 |
4035 |
24035 |
|
4035 |
2001-03 |
Hexagon thin nuts (unchamfered) - Product grades A and B |
In tables 1 and 2 abbreviations changed and some specifications (thread dimensions) changed |
Hexagon thin nuts with M 1,6 to M 52 and M 8x1 to M 52x3 threads |
439-2 |
4035 |
24035 |
4035 |
4035 |
2001-03 |
Hexagon thin nuts (unchamfered) - Product grades A and B |
Standard divided by regular type screw threads and fine threads; width across flats according to ISO 272 changed; nominal size range changed; fine thread see ISO 8675 |
Hexagon thin nuts with M 1,6 to M 52 and M 8x1 to M 52x3 threads |
439-2 |
8675 |
28675 |
|
8675 |
2001-03 |
Hexagon thin nuts (unchamfered) with metric fine pitch thread - Product grades A and B |
Standard divided by regular type screw threads and fine threads; width across flats according to ISO 272 changed; nominal size range changed; regular type screw thread see ISO 4035 |
Hexagon washers head drilling screws with tapping screw thread |
7504 |
15480 |
|
|
15480 |
2000-02 |
Hexagon washers head drilling screws with tapping screw thread |
Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3,9 omitted; hexagon head with collar and slot (Form L) omitted |
High-strength hexagon head bolts with large widths across flats for structural steel bolting |
6914 |
|
14399-4 |
|
7412 |
2006-06 |
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
|
High-strength hexagon nuts with large widths across flats for structural steel bolting |
6915 |
|
14399-4 |
|
|
2006-06 |
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
|
M 8x1 to M 100x4 hexagon head bolts with fine pitch thread |
961 |
8676 |
28676 |
8676 |
8676 |
2001-03 |
Hexagon head screws with metric fine pitch thread - Product grades A and B |
Nominal size extended; width across flats according to DIN ISO 272 included |
Mushroom head square neck bolts |
603 |
|
|
|
8677 |
1981-10 |
|
|
Parallel pins of unhardened steel and austenitic stainless steel |
7 |
2338 |
22338 |
|
2338 |
1998-02 |
Parallel pins of unhardened steel and austenitic stainless steel |
Nominal length redefined (with round end) form A+C deleted |
Parallel pins with internal thread |
7979 |
8735 |
28735 |
|
8735 |
1998-03 |
Parallel pins with internal thread, of hardened and martensitic stainless steel |
Dimensions partially changed |
Parallel pins with internal thread, of unhardened and austenitic stainless steel |
7979 |
8733 |
28733 |
|
8733 |
1998-03 |
Parallel pins with internal thread, of unhardened and austenitic stainless steel |
Dimensions partially changed |
Parallel pins, Hardened; Tolerance Zone m6 |
6325 |
8734 |
28734 |
|
8734 |
1998-03 |
Parallel pins of hardened and martensitic stainless steel (Dowel pins) |
Some other nominal lengths defined |
Plain washers - Extra large series, product grade C |
440 |
7094 |
|
|
7094 |
2000-12 |
Plain washers - Extra large series, product grade C |
Nominal sizes changed, nominal size 24 size "a" redefined to the maximum, square-end hole Form R omitted; (standard DIN 440 still valid) |
Plain washers for clevis pins; product grade A |
1440 |
|
28738 |
|
8738 |
1992-10 |
Plain washers for clevis pins; product grade A |
Nominal sizes changed |
Prevailing torque type - All-metal hexagon nuts with flange |
6927 |
|
1664 |
|
7044 |
1998-02 |
Prevailing torque type - All-metal hexagon nuts with flange |
Width across flat M10 changed |
Prevailing torque type all-metal hexagon nuts |
6925 |
7042 |
27042 |
|
7042 |
1998-02 |
Prevailing torque type (all-metal hexagon nuts), style 2 - Property classes 5, 8, 10 and 12 |
Height of nut changed; width across flat according to ISO 272 included |
Prevailing torque type all-metal hexagon nuts |
6925 |
10513 |
30513 |
|
10513 |
1998-02 |
Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread - Property classes 8, 10 and 12 |
Height of nut changed; width across flat according to ISO 272 included |
Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread |
6926 |
|
1666 |
|
12125 |
1998-02 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread |
Width across flat M10 changed |
Prevailing torque type hexagon nuts with non-metallic insert |
982 |
7040 |
27040 |
|
7040 |
1998-02 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 |
Height of nut changed; width across flat according to ISO 272 included |
Prevailing torque type hexagon nuts with non-metallic insert |
982 |
10512 |
30512 |
|
10512 |
1998-02 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 |
Height of nut changed; width across flat according to ISO 272 included |
Prevailing torque type hexagon nuts with non-metallic insert |
6924 |
7040 |
27040 |
|
7040 |
1998-02 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 |
Height of nut changed; width across flat according to ISO 272 included |
Prevailing torque type hexagon nuts with non-metallic insert |
6924 |
10512 |
30512 |
|
10512 |
1998-02 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 |
Height of nut changed; width across flat according to ISO 272 included |
Prevailing torque type hexagon thin nuts with non-metallic insert |
985 |
10511 |
|
|
10511 |
1998-02 |
Prevailing torque type hexagon, thin nuts (with non-metallic insert) |
Height of nut changed; width across flat according to ISO 272 included |
Product grade A washers with a hardness from 300 HV, designed for use with hexagon head bolts and nuts |
125-2 |
7089 |
|
|
7089 |
2000-11 |
Plain washers - Normal series, Product grade A |
Without chamfer, up to nominal diameter 64 |
Product grade A washers with a hardness from 300 HV, designed for use with hexagon head bolts and nuts |
125-2 |
7090 |
|
|
7090 |
1990-03 |
Plain washers, chamfered - Normal series, Product grade A |
Without chamfer, up to nominal diameter 64 |
Product grade A washers with a hardness up to 250 HV, designed for use with cheese head screws |
433-1 |
7092 |
|
|
7092 |
2000-11 |
Plain washers - Small series, Product grade A |
Pyramid diamond hardness 140 HV cancelled; rating changed |
Product grade A washers with a hardness up to 250 HV, designed for use with hexagon head bolts and nuts |
125-1 |
7089 |
|
|
7089 |
2000-11 |
Plain washers - Normal series, Product grade A |
Without chamfer, up to nominal diameter 64 |
Product grade A washers with a hardness up to 250 HV, designed for use with hexagon head bolts and nuts |
125-1 |
7090 |
|
|
7090 |
1990-03 |
Plain washers, chamfered - Normal series, Product grade A |
Without chamfer, up to nominal diameter 64 |
Product grade A washers with a hardness up to 300 HV, designed for use with cheese head screws |
433-2 |
7092 |
|
|
7092 |
2000-11 |
Plain washers - Small series, Product grade A |
Nominal sizes changed |
Product grade C washers, designed for use with hexagon head bolts and nuts |
126 |
7091 |
|
|
7091 |
2000-11 |
Plain washers - Normal series, Product grade C |
Nominal sizes changed |
Raised countersunk (oval) head; tapping screws with cross recess |
7983 |
|
|
7051 |
7051 |
1990-08 |
Cross recessed raised countersunk (oval) head tapping screws |
Head dimensions and countersunk angles changed |
Recessed raised cheese (fillister) head screws |
7985 |
7045 |
|
|
7045 |
1994-10 |
Pan head screws with type H or type Z cross recess - product grade A |
Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed |
Slotted cheese head screws - Product grade A |
84 |
1207 |
|
|
1207 |
1994-10 |
Slotted cheese head screws - Product grade A |
Modifications of dimensions < 2,5; dimension of slots changed; partly nominal lengths deleted; strength 8.8 deleted |
Slotted countersunk (flat) head screws (Countersunk heads according to ISO) |
963 |
2009 |
|
2009 |
2009 |
1994-10 |
Slotted countersunk flat head screws (common head style) - Product grade A |
Nominal size changed; head dimension changed; thread length changed; strength 8.8 cancelled |
Slotted headless screws with shank |
427 |
2342 |
|
|
2342 |
2004-05 |
Slotted headless screws with shank |
|
Slotted pan head screws - Product grade A |
85 |
1580 |
|
|
1580 |
1994-10 |
Slotted pan head screws - Product grade A |
Thread included; dimensions of head and slot changed; strength 8.8 deleted |
Slotted raised countersunk (oval) head screws (Countersunk heads according to ISO) |
964 |
2010 |
|
2010 |
2010 |
1994-10 |
Slotted raised countersunk head screws (common head style) - Product grade A |
Nominal size changed; head dimension changed; thread length changed; strength 8.8 cancelled |
Slotted set screws with cone point |
553 |
|
27434 |
|
7434 |
1992-10 |
Slotted set screws with cone point |
No modifications of dimensions |
Slotted set screws with cup point |
7976 |
|
|
1479 |
1479 |
1990-08 |
Hexagon head tapping screws |
No modifications of dimensions |
Slotted set screws with flat point |
551 |
|
24766 |
|
4766 |
1992-10 |
Slotted set screws with flat point |
No modifications of dimensions |
Slotted set screws with long dog point |
94 |
1234 |
|
|
1234 |
1998-02 |
Split pins |
No modifications of dimensions |
Slotted set screws with long dog point |
417 |
|
27435 |
|
7435 |
1992-10 |
Slotted set screws with long dog point |
No modifications of dimensions |
Spring-type straight pins - Coiled, heavy duty |
7344 |
8748 |
28748 |
8748 |
8748 |
2007-06 |
Spring-type straight pins - Coiled, heavy duty |
Range of nominal diameters and lengths extended. Shear range changed. |
Spring-type straight pins - Coiled, standard duty |
7343 |
8750 |
28750 |
8750 |
8750 |
2007-06 |
Spring-type straight pins - Coiled, standard duty |
Range of nominal diameters and lengths extended. Shear range changed. |
Spring-type straight pins - Slotted, heavy duty |
1481 |
8752 |
28752 |
|
8752 |
1998-03 |
Spring-type straight pins - Slotted, heavy duty |
Specification "non-jamming" included; chamfer redefined; partial change of dimensions |
Spring-type straight pins, slotted, light duty |
7346 |
13337 |
|
|
3337 |
2009-10 |
Spring-type straight pins - Slotted, light duty |
Specification "non-jamming" included; chamfer redefined; partial change of dimensions |
Thread rolling screws for ISO metric thread - Part 1: Technical specifications for case hardened and tempered screws |
7500-1 |
7085 |
|
|
|
2009-06 |
Thread rolling screws for ISO-metric thread |
Normative revision, values for case-hardening depth and hole size revised, torque values reduced |
Unhardened taper pins |
1 |
|
22339 |
|
2339 |
1992-10 |
Unhardened taper pins |
Nominal length redefined (with round end) |
Unhardened taper pins with external thread |
7977 |
|
28737 |
|
8737 |
1992-10 |
Unhardened taper pins with external thread |
Technical delivery conditions partially changed |
Unhardened taper pins with internal thread |
7978 |
|
28736 |
|
8736 |
1992-10 |
Unhardened taper pins with internal thread |
Dimensions partially changed |
Washers for high tensile bolting in steel structures |
6916 |
|
14399-6 |
|
7416 |
2006-06 |
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers |
|
Washers; outside diameter ˜ 3 x bolt diameter |
9021 |
7093-1 |
|
|
7093-1 |
2000-11 |
Plain washers - Large series - Part 1: Product grade A |
Dimensions partially changed |
Washers; outside diameter approx. 3 x bolt diameter |
9021 |
7093-2 |
|
|
7093-2 |
2000-11 |
Plain washers - Large series - Part 2: Product grade C |
Dimensions partially changed |